What Is The US Battery US2200XC 6 Volt Deep Cycle Battery?
The US Battery US2200XC2 6V Deep Cycle Battery is a flooded lead-acid (FLA) power solution designed for heavy-duty applications like golf carts, floor scrubbers, and aerial platforms. Rated at 232Ah over 20 hours, it features proprietary DiamondPlate Technology® and XC2™ electrolyte formulation for accelerated capacity buildup (25 cycles to peak performance) and extended service life. With dimensions of 10.25″×7.125″×11.25″, it delivers 122 minutes at 75A discharge and carries a 12-month replacement warranty. The ABS casing with reinforced polypropylene withstands mechanical stress in industrial environments.
36V 100Ah Lithium Golf Cart Battery
What Technical Specifications Define the US2200XC2?
The US2200XC2 operates at 6V with 232Ah capacity via 20-hour discharge. Its XC2 electrolyte reduces sulfation, achieving 90% capacity within 15 cycles compared to 30-40 cycles in standard FLA batteries. Heavy-duty lead-calcium grids minimize water loss to <3ml/Ah monthly.
Three critical performance metrics set this battery apart: 474-minute runtime at 25A (ideal for slow-discharge equipment), 122 minutes at 75A (peak demand scenarios), and 85-minute reserve capacity. The DiamondPlate Technology enhances active material adhesion, sustaining 1,000+ deep cycles at 50% DoD. Pro Tip: Use automatic watering systems with distilled water to maintain electrolyte levels between plate tops and vent wells. For comparison:
| Parameter | US2200XC2 | Standard 6V FLA |
|---|---|---|
| Peak Cycles (50% DoD) | 1,200 | 600-800 |
| Self-Discharge/Month | 3% | 5-8% |
Which Applications Benefit Most from This Battery?
Optimized for multi-shift operations, the US2200XC2 excels in Class I/II golf carts needing 30-40 mile daily ranges and floor scrubbers requiring 6-8 hours continuous runtime. Its vibration-resistant design handles scissor lifts’ abrupt movements where AGM batteries might fracture.
Beyond motive power, this battery reliably supports UPS systems in remote telecom sites due to its wide temperature tolerance (-20°C to 50°C). A real-world example: Three series-connected US2200XC2 units (18V system) power mid-sized aerial platforms for 120 lift cycles between charges. However, lithium alternatives like 48V 200Ah Lithium Forklift Battery outperform it in weight-sensitive applications.
How Does Charging Impact US2200XC2 Longevity?
Proper charging preserves the US2200XC2’s lifespan. Use three-stage chargers with 7.35-7.45V absorption (2.45V/cell) and float at 6.75-6.9V. Overcharging beyond 7.5V accelerates grid corrosion, while undercharging below 6.3V causes stratification.
Equalize monthly at 7.5V for 4 hours when specific gravity varies >0.030 between cells. Post-equalization, check electrolyte levels – excessive bubbling indicates overcharge damage. Pro Tip: Install temperature-compensated charging systems in environments exceeding 30°C to prevent thermal runaway.
What Maintenance Ensures Optimal Performance?
Monthly maintenance includes checking terminal torque (5.6-7.2 N·m), cleaning corrosion with bicarbonate solution, and verifying electrolyte levels 6mm above plates. Use only distilled water – contaminants reduce conductivity by up to 40%.
Hydrometer readings should show 1.265-1.299 specific gravity across all cells. A variance >0.015 indicates charging issues or cell failure. In freezing climates, maintain >75% SoC to prevent electrolyte freezing below -40°C. For comparison:
| Maintenance Task | Frequency | Tool |
|---|---|---|
| Water Refill | Biweekly | Distilled Water |
| Terminal Cleaning | Monthly | Wire Brush |
Battery Expert Insight
FAQs
Yes, but all units must be within 10% capacity variance and same cycle count. Mismatched series connections reduce system capacity by weakest battery’s rating.
What’s the proper disposal method?
Return to certified recyclers – lead recovery rates exceed 98%. Never landfill – improper disposal incurs $10k+ EPA fines per incident.